User's Manual

User’s Manual
83
Figure 5-47 Auto register
Step 2 Select the
Enable
checkbox to enable
Auto Register
.
Step 3 Enter
IP Address
,
Port
and
Sub-Device ID
.
Table 5-19 Description of auto register parameter
Parameter
Description
IP Address
The IP address of server that needs to be registered to.
Port
The port for auto-registration.
Sub-Device ID
Sub device ID assigned by server.
Step 4 Click
Save
.
5.2.11 Wi-Fi
Devices with Wi-Fi function can access network through Wi-Fi.
● Wi-Fi and WPS are available on select models.
● All devices with WPS button support WPS function.
5.2.11.1 Wi-Fi Settings
The name, status and IP information of current hotspot are displayed in the Wi-Fi information
bar. Click
Refresh
after reconnection to make sure that the operating status is displayed in
real time. Connecting Wi-Fi hotspot takes some time depending on network signal strength.
Step 1 Select the
Enable
checkbox.