User's Manual

User’s Manual
82
when main stream and sub stream are used. TS is disabled by default.
5.2.9.1 RTP
Step 1 Select
Setting
>
Network
>
Multicast
>
RTP
.
Figure 5-45 RTP page
Step 2 Enable main stream or sub stream.
Step 3 Enter multicast address and port number.
Step 4 Click
Save
.
5.2.9.2 TS
Step 1 Select
Setting
>
Network
>
Multicast
>
TS
.
Figure 5-46 TS page
Step 2 Enable main stream or sub stream.
Step 3 Enter multicast address and port number.
Step 4 Click
Save
.
5.2.10 Auto Register
After you enable this function, when the Device is connected to Internet, it will report the
current location to the specified server which acts as the transit to make it easier for the client
software to access the Device.
Step 1 Select
Setting
>
Network
>
Auto Register
.