User's Manual

User’s Manual
78
Configuring UPnP
1. Select
Setting
>
Network
>
UPnP
.
Figure 5-41 UPnP
2. Select
Enable
.
3. Select a mode from the drop-down list.
There are 2 mapping modes:
Custom
and
Default
.
● In
Custom
mode, users can modify the external port.
● Select
Default
, and then the system finishes mapping with unoccupied port
automatically. In this case, you do not need to modify mapping relation.
4. Select
Start Device Discover
.
5. Click
Save
.
5.2.7 Bonjour
Introduction
Bonjour is also called zero-configuration networking, which can automatically discover
computers, devices and services on IP networks. Bonjour is a protocol of industry standard
which allows devices to search and find each other. IP address or DNS server is not required
during the process.
Enable this function, and the network camera will be automatically detected by the OS and
client with Bonjour function. When the network camera is automatically detected by Bonjour,
server name you have set will be displayed.
Configuring Bonjour
1. Select
Setting
>
Network
>
Bonjour
.
Figure 5-42 Bonjour page