User's Manual

User’s Manual
77
Type
SMTP Server
Authentication
Port
Description
163
smtp.163.com
SSL
465/994
● You need to enable
SMTP service in
your mailbox.
● The authentication
code is required; the
email password is
not applicable.
Authentication code is
the code you receive
when enabling SMTP
service.
TLS
25
—
Sina
smtp.sina.com
SSL
465
You need to enable
SMTP service in your
mailbox.
—
25
126
smtp.126.com
—
25
You need to enable
SMTP service in your
mailbox.
Step 3 Click
Save
.
5.2.6 UPnP
After UPnP is enabled, Intranet service and port of the Device will be mapped to Extranet.
Think twice before enabling it.
UPnP (Universal Plug and Play) allows you to establish the mapping relationship between
Intranet and Extranet. Extranet users can access Intranet device by visiting Extranet IP
address. Intranet port is device port and Extranet port is router port. Users can access the
Device by accessing Extranet port. When you are not using routers for UPnP, disable UPnP to
avoid affecting other functions.
Once UPnP is enabled, the Device supports UPnP protocol. In Windows XP or Windows Vista,
after UPnP is enabled, the Device can be automatically searched by Windows network.
Adding UPnP Network Service in Windows System
1. Open
Control Panel
, and then select
Add or Remove Programs
.
2. Click
Add/Remove Windows Components
.
3. Select
Network Service
from the
Windows Components Wizard
and click
Details
button.
4. Select
Internet Gateway Device Discovery and Control Client
, and
UPnP User
Interface
, and then click
OK
to start installation.