User's Manual

User’s Manual
71
Figure 5-36 Port page
Step 2 Configure each port value of the Device.
● Except
Max Connection
, modifications of other parameters will take effect after
restart.
● 0–1024, 1900, 3800, 5000, 5050, 9999, 37776, 37780–37880, 39999, and 42323
are occupied for specific uses.
● It is not recommended to use the default values of other ports during port
configuration.
Table 5-14 Description of port parameter
Parameter
Description
Max Connection
The maximum number of users that can log in to the web page of the
Device simultaneously. The value ranges from 1 to 10, and it is 10 by
default.
TCP Port
TCP service port. The value is 37777 by default. You can set this
parameter as needed.
UDP Port
User Datagram Protocol port. The value is 37778 by default. You can
set this parameter as needed.
HTTP Port
HTTP communication port. The value is 80 by default. You can set
this parameter as needed.