User's Manual

User’s Manual

Figure 5-35 TCP/IP settings

Step 2 Set TCP/IP parameters.

Table 5-12 Description of TCP/IP parameter

Parameter

Description

Host Name

Set the name of the current device. The host name can be

English or Chinese within 63 bytes.

Ethernet Card

Select the Ethernet card to be configured.

Wire

is selected by

default.

If the Device is configured with multiple Ethernet cards, the

default Ethernet card can be changed. If you reset the default

Ethernet card, restart the Device.

Set as Default Card

Click to set the current Ethernet card as the default card.

Mode

Static

and

DHCP

modes are available.

● If

DHCP

is selected, the IP address is obtained

automatically. In this case, the IP address, subnet mask,

and gateway cannot be set.

● If

Static

is selected, you need to set the IP address, subnet

mask, and gateway manually.

MAC Address

Display the MAC address of the Device.