User's Manual

User’s Manual
62
Step 4 Click
Save
.
The exception information is displayed on the image.
5.1.2.3.10 Latitude and Longitude
You can enable this function if you need to display latitude and longitude on the video image.
Step 1 Select
Setting
>
Camera
>
Video
>
Overlay
>
Latitude and Longitude
.
Figure 5-29 Latitude and longitude
Step 2 Select the
Enable
checkbox.
Step 3 Drag the box to the position that you want on the image.
Step 4 Click
Save
.
5.1.2.4 ROI
You can set a key monitoring region as a ROI (region of interest), and configure the image
quality of this region.
ROI is available on select models.
Step 1 Select
Setting
>
Camera
>
Video
>
ROI
.