User's Manual

User’s Manual
58
5.1.2.3.4 OSD Info
You can enable this function if you want to display preset title, temperature, PTZ life warning,
coordinates, zoom, north direction, pattern, RS-485, battery information, and other information
on the video image.
Step 1 Select
Setting
>
Camera
>
Video
>
Overlay
>
OSD Info
.
Figure 5-23 OSD info
Step 2 Configure OSD information.
Table 5-10 Description of OSD information
Parameter
Description
Preset
Select
Enable
, and the preset name is displayed on the image when
the camera turns to the preset, and it will disappear 3 s later.
For some devices, you can set the duration of the preset title
displaying on the screen. You can select from
Disable
,
5s
,
15s
,
Display Permanently
, and
Custom
.
Temperature
Select
Enable
, and the internal temperature of the current device is
displayed.
PTZ Life Warning
When the PTZ lifespan is close to the threshold, a warning will be
displayed on the video image. This OSD info is enabled by default.
Coordinates
Select
Enable
, and the PTZ coordinates information is displayed on
the image.
Zoom
Select
Enable
, and the zoom information is displayed on the image.
For example, means 12x zoom rate.
North
Select
Enable
, and the north direction is displayed on the image.
Pattern
Select
Enable
, and the pattern information is displayed on the
image.