User's Manual

User’s Manual
53
Figure 5-17 Profile management—schedule
Step 3 Click
Save
.
5.1.2 Video
You can set the video stream, snapshot stream, video overlay, ROI, and storage path of the
Device.
5.1.2.1 Video Stream
This section describes how to set the video stream for the monitoring screen.
Step 1 Select
Setting
>
Camera
>
Video
>
Video
.
Figure 5-18 Video stream settings
● The stream configuration interfaces might vary depending on devices, and the
actual interface shall prevail.
● The default bit rate of different devices might vary, and the actual product shall
prevail.
Step 2 Configure video stream parameter.
Table 5-8 Description of video stream parameters
Parameter
Description
Enable
You can select the check box to enable sub stream. The sub stream is
enabled by default.
Encode Mode
You can select
H.264
,
H.264H
,
H.264B
,
H.265
,
MJPEG
,
MPEG4
, or
SVAC
.