User's Manual

User’s Manual
52
Parameter
Description
Intensity
Set the defog intensity of the Device. You can select from
Low
,
Medium
,
or
High
.
Defog
Enhancement
In
Manual
mode, if you enable this function, both optical defog and
electronic defog are enabled. (You need to enable
Auto
mode for
Day &
Night
to use the function.)
Only the Device that supports optical defog has this parameter.
Step 3 Click
Save
.
5.1.1.2 Profile Management
Step 1 Select
Setting
>
Camera
>
Conditions
>
Profile Management
.
Step 2 Select the profile management mode.
There are three options:
General
,
Full Time
and
Schedule.
● If you select
General
, monitoring is based on the general configuration of the
Device.
Figure 5-15 Profile management—general
● If you select
Full Time
,
Day
and
Night
are selectable, and the corresponding
camera property profile is day or night.
Figure 5-16 Profile management—full time
● If you select
Schedule
, you can select one period for day configuration and
another period for night configuration. For example, you can set the day-time
configuration from 6:00 to 18:00, and set the night-time configuration from 18:00
to 6:00 on the next day.