User's Manual

User’s Manual
50
Laser Light
Laser light makes compensation for the ambient environment when it is used for long-distance
monitoring.
Step 1 Select
Setting
>
Camera
>
Conditions
>
Conditions
>
IR Light
.
Figure 5-12 Laser light settings
Step 2 Configure laser light setting parameter.
Table 5-6 Description of laser light setting parameter
Parameter
Description
Mode
Select the laser light mode from
ZoomPrio
and
Manual
. It is
ZoomPrio
by default.
●
ZoomPrio
: The Device can automatically adjust laser light
brightness according to the zoom times.
●
Manual
: Manually set laser light brightness and angle value.
Laser Intensity
Set the intensity of the laser light. The value ranges from 0 to 100.
Laser Angle
Set the angle value from 0 to 100.
Step 3 Click
Save
.
5.1.1.1.8 Defog
The defog function cannot be configured if backlight function is enabled. There will be a
prompt on the interface.
Image quality drops if the Device is installed in foggy or hazy environment. You can enable
defog to improve image quality.
Step 1 Select
Setting
>
Camera
>
Conditions
>
Conditions
>
Defog
.