User's Manual

User’s Manual
48
Table 5-5 Description of illuminator parameters
Parameter
Description
Fill Light
IR Mode
When the device is equipped with illuminators, you
can configure the fill light mode, including IR mode,
white light and smart illumination.
● IR Mode: Enable the IR light, and then the white
light is disabled. You can only capture black and
white images after enabling this function.
The IR light is turned off for cameras with low
power consumption by default. Turn on the IR
light if necessary.
● White Mode: Enable the white light, and the IR
light is disabled. You can capture clear scene
image after enabling this function.
● Smart Illumination: This function is mainly used at
night.
Smart illumination applies IR mode in most
situations. When an event occurs (for example,
motion detection and human detection), the
camera automatically switches to white light
mode to link image capturing and video recording
under the full color mode. The white light turns off
when the event stops, and then the mode
switches to IR mode according to the ambient
brightness.
The status of the illuminator mainly depends on time
and environment. If the smart illumination is
triggered at night and the event continues during the
day, the illuminator configured for the daytime will be
turned off.
White Mode
Smart
Illumination
Mode
Manual
Adjust the brightness of illuminator manually, and
then the system will supply illumination to the image
accordingly.
This function is available on select models.
Timing
Enable different light types in different time periods
according to actual condition. You can set four
periods with different light types.
This function is available on select models.