User's Manual

User’s Manual
47
5.1.1.1.7 Illuminator
This configuration is available only when the device is equipped with illuminators. Common
illuminators are classified into IR lights, white lights, laser lights, and full-spectrum lights.
Different device models support different types of illuminators.
This section is for reference only, and might differ from the actual interface.
IR Light/White Light
These are the conditions for using IR light and white light.
● When the day & night mode is set to
B/W
, the monitoring screen is black and white. In this
case, IR light is used.
● When the day & night mode is set to
Color
, the monitoring screen is colored. In this case,
white light is used.
● When the day & night mode is set to
Auto
, the monitoring screen color changes with the
ambient light condition, and the illuminator varies with the monitoring screen. In
B/W
mode,
the IR light is turned on; in
Color
mode, the white light is turned on.
● Full-spectrum IR light supports the infrared IR light and white-light IR light at the same time.
Some models are equipped with photoresistor that can turn on different types of illuminators
based on the ambient brightness.
Step 1 Select
Setting
>
Camera
>
Conditions
>
Conditions
>
Illuminator
.
Figure 5-11 Illuminator settings
Step 2 Configure illuminator parameters.