User's Manual

User’s Manual
22
Parameter
Description
Assistant
Reserved for special requirements.
If necessary, enable this function under the guidance of professionals.
Pan
Select
Pan
from the list, and then click
Start
. The PTZ starts to pan.
Go to
● Select
Go to
from the list, enter horizontal angle value, vertical angle
value and zoom, and then click
Go to
. The Device will turn to the
position you want.
● One unit of the horizontal angle value or vertical angle value you enter
equals 0.1 degree.
Menu
Figure 2-20 Menu page
Table 2-8 Description of menu parameter
Parameter
Description
Direction Buttons
Click the up and down buttons to select parameters, and click the
left and right buttons to select parameter values.
OK
Confirmation button.
Open
Open the OSD menu.
Close
Close the OSD menu.
Click
Open
to open the OSD menu. The OSD menu is displayed on the live view.
Figure 2-21 OSD menu
You can finish the following settings through the menu.
● Camera settings: For details, see "5.1 Camera".