User's Manual

User’s Manual
17
Figure 2-13 Video window function buttons
Table 2-5 Description of video window function button
No.
Parameter
Description
1
Wiper Control
Click this button to select wiper operation.
●
Start
: Click this button, and the wiper starts and waves
continuously.
●
Stop
: Click this button, and the wiper is turned off and
stops waving.
●
Once
: Click this button, and the wiper starts and waves
from left to right for one time.
2
Mark
Click this button, right-click on the
Live
interface, and the
function menu is displayed. See Figure 2-14. You can add
information on the
Live
interface, and also manage added
comments.
● Add info: Select
Add Info
from the pop-up menu, and
enter the comment. For the interface, see Figure 2-15.
● Manage comments: Select
Info Management
from the
pop-up menu to display, hide, or delete added
comments. For the interface, see Figure 2-16.
3
Regional Focus
Click the button, draw a box with the mouse on the live
view, and then the Device will automatically focus on the
area in the box.
4
Relay-out
Click the button, and an alarm will be triggered. When an
alarm is triggered, the icon turns red; and when an alarm is
canceled, the icon turns grey.
5
Gesture Control
Click the button, and you can drag the live view by
pressing and holding the left mouse button to control PTZ;
and you can also zoom in or out through the mouse wheel.
6
Digital Zoom
● Click the button, and then select an area in the live
view to zoom in; right-click on the image to restore to
the original status. In enlarged status, drag the image
to check other area.
● Click the button, and then scroll the mouse wheel in the
live view to zoom in or out.
7
Snapshot
Click the button to capture one image of the current image,
and it will be saved to the live snapshot storage path set in
"5.1.2.5 Path."