User's Manual

User’s Manual
97
Table 5-24 Description of analog PTZ parameter
Parameter
Description
Address
Enter the address of the Device.
Make sure that the address is the same as the device address;
otherwise you cannot control the device.
Baud Rate
Select the baud rate of the Device.
Data Bit
It is 8 by default.
Stop Bit
It is 1 by default.
Parity
It is
NONE
by default.
Step 3 Click
Save
.
5.4.2 Function
5.4.2.1 Preset
Select
Setting
>
PTZ
>
Function
>
Preset
. The
Preset
page is displayed.
If you click
Remove All
, all presets and special presets will be cleared.
Figure 5-67 Preset
5.4.2.1.1 Preset Settings
Preset means a certain position to which the Device rotates. Users can adjust the PTZ and
camera to the location quickly through calling presets.
Step 1 On the lower left corner of the
Preset
interface, click the direction buttons,
, , and to adjust the PTZ direction, speed, zoom, and focus of