User's Manual

User’s Manual
96
● Click
Delete
to delete the Bluetooth device.
5.4 PTZ Settings
5.4.1 Protocol
Network PTZ setting and analog PTZ setting are available on select models.
5.4.1.1 Network PTZ Settings
Step 1 Select
Setting
>
PTZ
>
Protocol
>
Network PTZ
.
Figure 5-65 Network PTZ setting
Step 2 Select a protocol.
You can select
DH-SD1
,
DH-SD3
,
PELCOD
, or
PELCOP
.
DH-SD1
is selected by
default.
DH-SD1 protocol supports up to 80 presets, and DH-SD3 protocol supports up to 300
presets.
Step 3 Click
Save
.
5.4.1.2 Analog PTZ Settings
Step 1 Select
Setting
>
PTZ
>
Protocol
>
Analog PTZ
.
Figure 5-66 Analog PTZ setting
Step 2 Configure analog PTZ parameter.