User's Manual

User’s Manual
90
Make sure that you add international calling codes before the phone number to avoid
unnecessary charges caused by phone calls or messages to other countries or regions.
Figure 5-57 Mobile setting page
●
Message Send
: When alarms are triggered, the phone number added will receive
message.
●
Message Activation
: You can enable 4G through message outside the period you set to
use 4G. You need to send "ON" or "OFF" to phone number of the SIM card in the Device.
"ON" indicates enabling, and "OFF" indicates disabling.
●
Phone Activation
: You can enable 4G through phone calls outside the period you set to
use 4G. You need to call the phone number of the SIM card in the Device. If the call gets
through, it means 4G has been enabled.
● Make sure that your SIM card supports making phone calls and sending messages, and it
can be used normally.
● Make sure that you use activation function outside the time range you set; otherwise it does
not work.
Step 1 Select the check box of the service you need to enable. You can select one or more
services.
Step 2 Enter the phone number and click to add it.
Step 3 Click
Save
.
Step 4 Select the
Message Link
checkbox on the page of the event for which you want to
receive message.
Take Face Detection for example. Click
Setting
>
Event
>
Face Detection
, and then
select the
Message Link
checkbox.