User's Manual

User’s Manual
89
● If the current time is in the period you set, 4G network connection will be enabled.
The IP address of the SIM card will be displayed in IP Address. And you can
access the device through 4G after finishing the rest steps.
● If the current time is not in the period you set, 4G network connection will not be
enabled. Only the corresponding
Wireless Signal
is displayed on the page. And
you cannot access the device through 4G.
Figure 5-56 Period setting
Step 4 Set the interval to enable 4G through message or phone call if you want to use 4G
outside the period set in Step3.
The value range is 0–7200 s and it is 30 s by default. If the interval is 30 s, after
activating 4G, you can use it for 30 s. After 30 s, you need to activate 4G again. If
you set the interval to 0 s, you can use 4G without disconnection and you do not
need to activate it again. For the method to activate 4G through message or phone
call, see"5.2.14.2 Mobile Setting".
Step 5 Click
Save
.
5.2.14.2 Mobile Setting
Log in to web page, select
Setting
>
Network
>
4G
>
Mobile Settings
.
You can add the phone number to receive alarms. You also can add phone number used to
activate 4G through message or phone call if you want to use 4G outside the period set in
Step3 of "5.2.14.1 Dialing Setting".