User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
87
Figure 4-84 Add user (restricted log)
Step 3 Configure user parameters.
Table 4-29 Description of user parameters
Parameter Description
Username
User’s unique identification. You cannot use existing user name.
The max. length of the user or group name is 31 characters which
consist of number, letter, underline, dash, dot and @.
Password Enter password and confirm it again.
The password must consist of 8–32 non-blank characters and
contain at least two types of the following characters: Uppercase,
lowercase, numbers, and special characters (excluding ' " ; : &). Set
a high-security password based on the password strength
prompt.
Confirm Password
Group
The group that users belong to. Each group has different
authorities.
Remarks Describe the user.
System
Select system authorities as needed.
We recommend giving fewer authorities to normal users than
premium users.
Live Select the live view authority for the user to be added.
Search Select the search authority for the user to be added.