User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
83
4.8.1 General
4.8.1.1 Basic
You can configure device name and video standard.
Step 1 Select >
System
>
General
>
Basic
.
Figure 4-78 Basic
Step 2 Configure general parameters.
Table 4-27 Description of general parameters
Parameter Description
Name
Enter the device name. When a device is added by another device,
the device name is displayed as the defined device name.
Different devices have different names.
Video Standard
Select video standard from
PAL
and
NTSC
.
Analog Output
This function is available only for devices that support analog
output.
●
Some devices automatically turn off AI function when enabling
analog output, and automatically turn off analog output when
enabling AI function.
●
Some devices support SDI (Serial Digital Interface) and HDCVI
(High Definition Composite Video Interface) function.
Step 3 Click
Apply
.
4.8.1.2 Date & Time
You can configure date and time format, time zone, current time, DST (Daylight Saving Time) or NTP
(Network Time Protocol) server.
Step 1 Select >
System
>
General
>
Date & Time
.