User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
75
Card
,
Low SD Card Space
, and
SD Card Error
. Functions might vary with different models.
Step 1 Select >
Event
>
Exception
>
SD Card Exception
.
Step 2 Select event type, and then enable SD card exception detection.
When the event type is
Low SD card space
, you can configure
Free Space
. When the
remaining free space is less than this value, an alarm is triggered.
Figure 4-69 SD card exception
Step 3 Click to enable the SD card detection functions.
When
Low SD Card Space
is enabled, set
Capacity Limit
. When the remaining space of SD
card is less than this value, the alarm is triggered.
Step 4 Set alarm linkage actions. For details, see "4.6.1.2 Alarm Linkage".
Step 5 Click
Apply
.
4.6.2.2 Setting Network Exception
In case of network exception, the system performs alarm linkage. The event types include
Offline
and
IP Conflict
.
Step 1 Select >
Event
>
Exception
>
Network Exception
.