User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
72
4.6.1.2.5 Email Linkage
When an alarm is triggered, the system will automatically send an email to defined users.
Prerequisites
Email linkage takes effect only when SMTP is configured. For details, see "4.4.5 Email".
Setting Email Linkage
On the
Alarm
page, click to enable email linkage.
Figure 4-66 Email linkage
4.6.1.3 Alarm Linkage
When configuring alarm events, select alarm linkages (such as record, snapshot). When the
corresponding alarm is triggered in the defined arming period, the system will trigger alarm linkage.
Step 1 Select >
Event
>
Alarm
, and then click next to
Enable
to enable alarm
linkage.
Step 2 Click
Apply
.
Figure 4-67 Alarm linkage