User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
69
Figure 4-60 Alarm linkage
4.6.1.2.1 Adding Schedule
Configure arming schedule. The system only performs corresponding linkage action in the defined
period.
Step 1 Click
Add Schedule
next to
Schedule
.
Step 2 Click
Time Plan Table
.
You can set up multiple time plan tables for selection.
Step 3 Configure the name of the
Time Plan Table
.
Step 4 Configure arming periods.
1) Press and drag the left mouse button on the timeline to set arming periods. The green
area on the timeline means that this time period has been armed.