User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
66
Figure 4-57 Scheduled task
Step 5 Set the time for
Auto Home
.
Auto Home
: When the scheduled task is interrupted by an artificial call to the PTZ, the
device will automatically resume the scheduled task after the auto home time.
Step 6 Click
Apply
.
4.5.11 Configuring PTZ Maintenance
PTZ Maintenance includes
PTZ Restart
and
Default
.
Step 1 Click and then select
PTZ
>
PTZ Maintenance
.
Step 2 Click
PTZ Restart
to restart PTZ or click
Default
to restore PTZ to defaults.
Default PTZ will restore the Camera to defaults. Think twice before clicking
Default
.
4.5.12 Configuring Protocol
Configure parameters for RS-485.
Step 1 Click and then select
PTZ
>
Protocol
.