User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
65
Figure 4-56 PTZ rotation limit
Step 5 Select the elevation value from the drop-down list of
Max Elevation Angle
.
This function is available on select models.
Step 6 Click
Enable
to enable
PTZ Rotation Limit
.
4.5.10 Configuring Scheduled Task
After setting scheduled task, the Camera performs the relevant motions during the set period.
Prerequisites
You have set PTZ motions such as preset, tour, scan and pattern in advance.
Procedure
Step 1 Click and then select
PTZ
>
Scheduled Task
.
Step 2 Click
Add Scheduled Task
.
Step 3 Select
Task Action
.
Some task actions need to select corresponding action number.
Step 4 Select
Time Plan
or click
Add Schedule
. Configure the name and time of the scheduled
task in the pop-up page, and then click
Apply
.
To configure arming/disarming period, see"4.6.1.2.1 Adding Schedule".