User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
64
Figure 4-55 PowerUp
Step 4 Click
Apply
.
4.5.9 Configuring PTZ Rotation Limit
Configure PTZ rotation limit to enable the Camera to move only within the defined PTZ area, and to
rotate only within the limit range when calling functions such as tour and pan.
Step 1 Click and then select
PTZ
>
PTZ Rotation Limit
.
Step 2 Adjust the device direction to the
Up Limit
, and then click up limit
Setting
to set the
current position to the up limit.
Step 3 Adjust the device direction to the
Down Limit
, and then click down limit
Setting
to set the
current position to the down limit.
Step 4 Click
Go to
to preview the defined up/down limit.