User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
63
Figure 4-54 Idle motion
Step 4 Click
Apply
.
4.5.8 Configuring Power Up
After configuring PowerUp, the camera will automatically perform the set motion after being
powered up.
Prerequisites
You have set PTZ motions such as preset, tour, scan and pattern in advance.
Procedure
Step 1 Click and then select
PTZ
>
PowerUp
.
Step 2 Click to enable PowerUp function.
Step 3 Select PowerUp type.
Select
Auto
and the system will implement the last action performed for more than 20
seconds before the Camera is shut down.