User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
52
Figure 4-42 Dial-up Setting
Step 3 Configure dial-up parameters.
Table 4-23 Description of dial-up setting parameters
Parameter Description
Network Type
The network types are as follows:
●
4G (TD-LTE)
: Dial (For China Mobile/Telecom/Unicom SIM
card).
●
4G (FDD-LTE)
: Dial (For Telecom/Unicom SIM card).
●
Auto
: We recommend you use the auto mode, and then the
system automatically selects the signal type.
●
5G (NR)
: Dial, text, call (For China Mobile/Telecom/Unicom
special network card).
APN
For ordinary cards, the APN (Access Point Name) of telecom is ctlte,
the mobile is cmnet, and the Unicom is 3gnet. The APN of special
network cards varies from card to card.
Authentication Type
For ordinary cards, the authentication type of telecom is CHAP
(Challenge Handshake Authentication Protocol) or PAP (Password
Authentication Protocol). The mobile and Unicom have no
authentication type. The authentication type of special network
cards varies from card to card.
Dial-up No.
For ordinary cards, the dial-up number of telecom is #777, the
mobile is *98*1#, and the Unicom is *99#. The dial-up number of
special network cards varies from card to card.