User's Manual

51
Figure 4-41 QoS
Table 4-22 Description of QoS parameters
Parameter Description
Real-time Monitoring
Configure the priority of the data packets that used for network
surveillance. 0 for the lowest and 63 the highest.
Operation Command
Configure the priority of the data packets that are used for configure
or checking. 0 for the lowest and 63 the highest.
Step 3 Click
Apply
.
4.4.12 Cellular Network
After the device is installed with the Subscriber Identification Module (SIM) card, the device can be
connected to the 5G network through dial-up settings or mobile settings, and then you can remotely
preview the real-time video of the device through the platform client or mobile phone client.
●
Dial-up setting: Connects the device to the 5G network within a specified time period.
●
Mobile setting: Connects the device to the 5G network by sending messages or making calls
through mobile phones, and alarm information can be received through messages.
4.4.12.1 Dial-up Settings
Connects the device to the 5G network through dial-up settings.
Step 1 Select >
Network
>
Cellular Network
>
Dial-up
.
After the SIM card is installed, the module information, network status and network signal
are displayed.
Step 2 Select
Network Type
, and then click to enable the 5G dial-up function.