User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
31
Figure 4-22 Custom title
Step 4 Move the custom box to the position that you want in the image.
Step 5 Click
Apply
.
4.3.2.2.8 Exception Overlay
You can enable this function to display the overlaid abnormal information of the cameras on the
screen.
Step 1 Select >
Camera
>
Encode
>
Overlay
>
Exception Overlay
.
Figure 4-23 Exception overlay
Step 2 Select
Enable
, and then click
Apply
.
4.3.2.2.9 Longitude & Latitude
You can enable this function to display the latitude and longitude information of the cameras on the
screen.
Step 1 Select >
Camera
>
Encode
>
Longitude & Latitude
.