User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
30
4.3.2.2.6 Picture Overlay
You can enable this function if you need to display image information on the video image.
Text overlay and picture overlay cannot work at the same time.
Step 1 Select >
Camera
>
Encode
>
Overlay
>
Picture Overlay
.
Step 2 Select channel and then select
Enable
.
Step 3 Click
Upload
, and then select the overlaid image.
The image shows in the
Picture Preview
.
Figure 4-21 Picture overlay
Step 4 You can move the overlaid image to the position you want in the image.
Step 5 Click
Apply
.
4.3.2.2.7 Custom Title
You can enable this function if you need to display custom information on the video image.
Step 1 Select >
Camera
>
Encode
>
Overlay
>
Custom Title
.
Step 2 Select
Enable
.
Step 3 Configure custom overlay, and then select the text alignment.
Click
+
to add the custom overlay, and you can add 1 line at most.