User's Manual

29
Table 4-12 Description of OSD information parameter
Parameter Description
Presets
Select
Enable
, and the preset name is displayed on the image
when the camera turns to the preset, and it will disappear 3 s
later.
PTZ Coordinates
Select
Enable
, and the PTZ coordinates information is displayed
on the image.
Zoom
Select
Enable
and the zoom information is displayed on the
image.
North
Select
Enable
, and the north direction is displayed on the image.
When you enable the due north orientation function, the system
will prompt you to restart the PTZ.
Pattern
Select
Enable
, and the pattern information is displayed on the
image.
RS485
Select
Enable
, and the RS485 information is displayed on the
image.
Location
Select
Enable
, and the geographical location is displayed in the
text.
Text Alignment
Set the alignment mode of the displayed information on the
image.
Step 3 Move the OSD box to the position that you want on the image.
Step 4 Click
Apply
.
4.3.2.2.5 Font Properties
You can enable this function if you need to adjust the font size in the video image.
Step 1 Select >
Camera
>
Encode
>
Overlay
>
Font Properties
.
Step 2 Select the font color and size.
You can set the RGB value to customize the font color.
Figure 4-20 Font properties
Step 3 Click
Apply
to complete the settings.
After saving the settings, the color and size of the font in the video image change
accordingly.