User's Manual

22
Figure 4-12 Expert Mode
2) Click to adjust the video screen and draw the training region on the screen.
Only supports closed model area (triangle and polygons above).
3) Double-click
Lens Magnification
to set focus magnification.
4) Click
Apply
to save settings.
5) Click
Start Scene Focusing Training
.
The scene rotates and automatically focuses to the specified position. After the training
is complete, the scene status is displayed as
Complete
.
Step 4 Click
Apply
.
4.3.1.9 Illuminator
This configuration is available only when the device is equipped with illuminator. Common
illuminators are classified into IR lights, white light, laser lights, and full-spectrum lights. Different
device models support different types of illuminators. This manual is for reference only, and might
differ from the actual page.
Step 1 Click on the upper-right corner of the page, and then select
Camera
>
Image
>
Illuminator
.
Step 2 Select the camera that needs to be configured from the
Channel
drop-down list and then
configure illuminator mode.
Figure 4-13 Illuminator