User's Manual

20
Figure 4-10 Day/Night mode
Table 4-7 Description of Day/Night mode parameters
Parameter Description
Mode
You can select device display mode from
Color
,
Auto
, and
B/W
.
Day/Night
configuration is independent from
Profile
management
configuration.
●
Color
: The system displays the image in color.
●
Auto
: The system switches between color and black-and-white according to
actual conditions.
●
B/W
: The system displays black-and-white image.
Sensitivity
This configuration is available only when you set
Auto
in
Mode
. You can
configure camera sensitivity when switching between color and black-and-
white mode. The higher the sensitivity, the easier it is for the switch to be
triggered.
Delay
This configuration is available only when you set
Auto
in
Mode
. You can
configure the delay when camera switching between color and black-and-white
mode. The lower the value is, the faster the camera switches between color and
black-and-white mode.
Step 3 Click
Apply
.
4.3.1.8 Focus & Zoom
Focus & Zoom (digital zoom) refers to capturing a part of the image to magnify it. The higher the
magnification is, the blurrier the images will become.
Step 1 Click on the upper-right corner of the page, and then select
Camera
>
Image
>
Focus
& Zoom
.
Step 2 Select the camera that needs to be configured from the
Channel
drop-down list and then
configure focus & zoom parameters.