User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
12
Parameter Description
Playback Snapshot
The snapshot of playback page.
The default path is
C:\Users\admin\WebDownload\PlaybackSnapshot.
Step 4 Click
Apply
.
Related Operations
●
Click
Refresh
to refresh the parameters of the current page.
●
Click
Default
to restore the default parameter values.
4.3 Camera
This section introduces camera configuration, including configuring image parameters, encoder
parameters, and audio parameters.
Camera parameters might differ depending on the device.
4.3.1 Setting Image Parameters
Configure image parameters according to the actual situation, including image, exposure, backlight,
white balance, Day/Night, and more.
4.3.1.1 Page Layout
Configure camera parameters to improve the image clarity, and ensure that surveillance goes well.
Camera supports two working modes:
Self-adaptive
and
Customized scene
. You can select 9
configuration file types, including day, night, general and front light, to set and view the
configuration parameters and effects under the corresponding type, including image, exposure and
backlight.
Figure 4-4 Camera conditions (common camera)