User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
11
Figure 4-3 Local
Step 2 Configure play parameters.
Protocol: Network transport protocol type, supporting TCP (Transmission Control Protocol)
port, UDP (User Datagram Protocol) port and multicast.
Before selecting
Multicast
, you need to configure multicast parameters in advance. For
details, see "4.4.9 Multicast".
Step 3 Click
Browse
to select the storage path for live snapshot, live record, playback snapshot,
playback download, and video clips.
Table 4-2 Description of local parameter
Parameter Description
Protocol
You can select the network transmission protocol from
TCP
,
UDP
and
Multicast
.
Before selecting
Multicast
, make sure that you have set the
Multicast
parameters.
Live Record
The recorded video of
Live
page.
The default path is
C:\Users\admin\WebDownload\LiveRecord.
Admin in the path
refers to the account
being used.
Playback
Download
The downloaded video of playback page.
The default path is
C:\Users\admin\WebDownload\PlaybackRecord.
Video Clips
The clipped video of playback page.
C:\Users\admin\WebDownload\VideoClips.
Live Snapshot
The snapshot of
Live
page.
The default path is
C:\Users\admin\WebDownload\LiveSnapshot.