User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
149
video metadata.
●
The left side displays real-time live screen; the right side displays large view of the snapshot and
detailed attribute information; the bottom displays the face, human body, non-motor vehicle and
motor vehicle snapshot statistics and snapshot thumbnails.
●
Click to change the attributes shown in the image. For details, see "Configuring Display
Properties".
Figure 8-21 Video metadata report
8.3 Configuring Tour Plan
You can configure the tour mode and time plan for different periods.
Step 1 Select
AI
>
Tour Plan
.
Step 2 Select
Enable
to enable tour plan function.
Step 3 Select tour mode and idle interval.
●
Tour mode Select
: It only supports
Scene Priority
at present. The Camera tours
according to the set duration of the scene.
●
Idle Interval
: The time between the user manually operate the Camera and the Camera
automatically rotates to the smart plan scene.
Step 4 Configure tour plan.
1) Set the start time and end time of the tour.
2) Select period, and then click
Setting
to configure multi-scenario tour.