User's Manual

148
Figure 8-20 Configuring rule parameters (traffic flow statistics)
Table 8-9 Description of video metadata parameter
Parameter Description
People Flow
Statistics
Click next to
People Flow Statistics
to count the number of people in
the detection area.
Traffic Flow
Statistics (Non-
motor Vehicles)
Click next to
Traffic Flow Statistics (Non-motor Vehicles)
to count
the number of non-motor vehicles in the detection area.
Traffic Flow
Statistics
Click next to
Traffic Flow Statistics
to count the number of motor
vehicles in the detection area.
Snapshot Mode
●
Optimized: Capture the images until the vehicle disappears from the
image, and upload the clearest image.
●
Tripwire: Capture the images when the vehicle triggers tripwire as the
configured direction. The steps are as follows:
1. Select
Tripwire
.
2. Select the direction from
A to B
,
B to A
and
Both.
3. Adjust the position of rule line as needed.
Step 8 Set arming periods and alarm linkage action.
●
Click
Add Schedule
to add time plan. For details, see "4.6.1.2.1 Adding Schedule".
●
Click
+ Event Linkage
to set the linkage action and configure linkage parameters. For
details, see "4.6.1.2 Alarm Linkage"
Step 9 Click
Apply
.
8.2.3.3 Viewing Video Metadata Report
Select
Metadata Mode
on the upper-left corner of the
Live
page to view the live video image of