User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Setting
- 4.1 Device Login
- 4.2 Local
- 4.3 Camera
- 4.4 Network
- 4.5 PTZ
- 4.5.1 Configuring Presets
- 4.5.2 Configuring Tour
- 4.5.3 Configuring Scan
- 4.5.4 Configuring Pattern
- 4.5.5 Configuring Pan
- 4.5.6 Configuring PTZ Speed
- 4.5.7 Configuring Idle Motion
- 4.5.8 Configuring Power Up
- 4.5.9 Configuring PTZ Rotation Limit
- 4.5.10 Configuring Scheduled Task
- 4.5.11 Configuring PTZ Maintenance
- 4.5.12 Configuring Protocol
- 4.6 Event
- 4.7 Storage
- 4.8 System
- 4.9 System Information
- 4.10 Setting Log
- 5 Live
- 6 Record
- 7 Picture
- 8 AI
- 9 Security
- 10 Report
- Appendix 1 Cybersecurity Recommendations
1
1 Overview
1.1 Introduction
Network Speed Dome PTZ Camera is a combination of traditional camera and network technology.
Users can remotely connect to the Camera through the network for configuration and management.
Get the camera IP address before visiting PTZ Camera through network, which can be searched by
ConfigTool.
Figure 1-1 Connected through network cable
Figure 1-2 Connected through network router or switch
1.2 Functions
Functions might be different depending on the model.
1.2.1 Basic Functions
Real-time Monitoring
●
Live view.
●
Displays human face, human body, non-motor vehicle, motor-vehicle and other metadata during
live view.
●
When watching the live view, you can enable audio, and talk to people in the monitoring area to
quickly process exceptions.
●
Adjust the image to the proper position by PTZ.