User's Manual

Dahua 5.8GHz Wireless AP/CPE User Manual
- 27 -
8. Advanced Settings
See Figure 22 for more information about advanced settings page.
Figure 22
Auto ACK-Timeout Adjust: Users are recommended to open “ACK-Timeout auto adjustment”, which
can auto test the distance between two devices; can set parameter according to this distance to optimize
wireless connection quality.
Distance: The distance setting will be invalid if the “ACK-Timeout auto adjustment” is open. The system
will auto test the device distance and optimize connection quality. Users need to close “ACK-Timeout
Auto Adjustment” if they want to make the self-set distance valid.
Aggregation: Make different frames combine together and send out, enable this function to improve
throughput rate and the device is enabled by default.
RTS Threshold: RTS/CTS mechanism will enable if the packet length is equal to or more than the set
value. At this moment, the station will send a RTS to access point to inform it that data will be sent when
the station tries to send data. After receiving the application, the access point will inform all the other
stations in its covered area by CTS, asking them to delay sending. Meanwhile, the access point will