User's Manual

Dahua 5.8GHz Wireless AP/CPE User Manual
- 26 -
Figure 21
1. Filter a device with IP address xxx.xxx.xxx.xxx
After firewall is enabled, IP filtering mode is set as reject, and set any item among IP1～IP10 as the
IP to be filtered.
2. Filter some device
After firewall is enabled, select MAC filtering mode as reject, set any item among Mac1～Mac10 as
the MAC address of the device to be filtered.
3. Filter all other devices except the device with IP xxx.xxx.xxx.xxx
Select IP filter as accept, and set any item among IP1～IP10 as the IP to be accepted.
4. Only accept some device
After firewall is enabled, select MAC filtering mode as accept, set any item among Mac1～Mac10 as
the MAC address of the device to be accepted.