User's Manual

Dahua 5.8GHz Wireless AP/CPE User Manual
- 22 -
6. Wireless Setting
More information about wireless setting.
There are five types of wireless mode of the device: AP mode, client mode, WDS client mode, WDS
Repeater
AP : Client device like computer, cell phone, wireless bridge and etc can connect to wireless access
node. One AP can connect several clients.
CPE/Client: It needs to be used cooperatively with AP, it connects to AP. One client can only connect to
one AP.
WDS Client: Same as client can only connect to WDS access point or WDS repeater, and one WDS
client can only be connected to one WDS access point or WDS repeater.
WDS Access Point: Can only connected to WDS repeater or WDS client, meanwhile one WDS access
point can connect to several WDS client or WDS repeater.
WDS Repeater: Can connect to WDS client or WDS repeater at the same time.
SSID: Used to control the value of access to wireless network. When other devices try to connect to this
device, only with same setting of SSID can they realize intercommunication and build LAN.
As shown in Figure 20, users can search the names of surrounding wireless network by click “select” on
the right of network name, and then connect to corresponding wireless network according to his own
demand.
Frequency: Center frequency of carries wave, bandwidth is the left-right offset of the center frequency. It
needs to be set parameter when it is used as AP mode. Users can select several frequencies when it is
client mode. Client can’t connect to AP when the frequency of AP is not the frequency selected by client.
Only when the frequency of AP is one of the frequencies selected by client can they be interconnected.