User's Manual

DH-PFM880 User Manual DaHua All Right Reserved
Page 30
Figure 25 VLAN Setting(1)
Bridge function is needed to use together with VLAN. As show below, we add
VLAN 10 on port eth0 and wlan0, they are eth0.10 and wlan0.10, and put them
into the same bridge. The packets from eth0.10 or wlan0.10 will be added a VLAN
label which ID is 10. That requires: the opposite wireless connection side must
support VLAN 10, the device which connects with eth0 is also need to support
VLAN 10.
Figure 26 VLAN Setting (2)
Below is a common usage: