User's Manual

DH-PFM880 User Manual DaHua All Right Reserved
Page 26
Figure 22 Network-Router mode
WAN ModeWAN mode can be configured to DHCP, Static IP or PPPoE. When set
to DHCP, the device can dynamically get the IP address. When set to Static IP, user
needs to manually set the IP address, Netmask, Gateway IP and other information.
WAN IPWAN IP address. It should be set to the same segment of IP address of
the internet provided by ISP, please check with the ISP for this information.
WAN NetmaskWAN Netmask, use can check with the ISP for this information.
Note: WAN IP address should not be the same as the IP devices of the internet to
avoid collision.
LAN IPLAN IP address.
LAN NetmaskLAN Netmask information.
Primary DNS and Secondary DNS: Please check with the ISP for the information.