User's Manual

DH-PFM880 User Manual DaHua All Right Reserved
Page 24
Frequency MHzThis only appears when the device is configured to Access Point
mode or WDS Access Point mode. The device can only work on one channel at the
same time.
Frequency Scan ListThis only appears when the device is configured to Station
mode or WDS Station mode. If it’s not enabled, the station will scan all the
channels which both the device and the country code allowed and then choose
the same channel as the associated AP. If it’s enabled, click select, another window
will pop up and let the user to choose the working channels, and the channels
should include the associated AP’s channel, which can fasten the association
process between the AP and the Station
Output PowerOutput power of the device.
Country CodeDifferent countries allows different channels, use can choose the
country code to only allow the device works at the channels permitted in the
particular country.
Channel Width Channel width selection, and DH-PFM880 device supports
5MHz/10MHz/20MHz/40MHz bandwidth.
Max TX RateMax transmission rate, and it can be used to limit the max
transmission rate of a device.
Lock AP MACIn Station, WDS Station, and WDS Repeater modes, users can use
this to limit the APs associated to.
SecurityUser can set the security based on needs to guarantee the wireless
security.
WPAEncryption method supported by 802.11 Protocols.