User's Manual
Table Of Contents
DH-PFM880 User Manual DaHua All Right Reserved
Page 12
Installation of DH-PFM880 can follow the below steps:
1. Take all the contents from the package
2. Mount DH-PFM880 in a mast, and then fix the device on the mast as shown in
Figure 5.
3. After the DH-PFM880 is fixed on the mast, protect the Ethernet cable using the
water-proof connector.
Figure 4 Water-proof connector and the Ethernet cable
4. Screw the water-proof connector well on the DH-PFM880 shell.
Figure 5 DH-PFM880 installation on a mast
2.2 Connections
The connection of DH-PFM880 device to PoE and power supply is shown in Figure
6.
TurobBridge5F has 1 RJ45 ports, and please connect the device with the PoE
power adaptor as shown in the Figure.