User's Manual

User’s Manual
28
The Radar misses vehicles passing or no speed measured.
 Check whether the Radar is facing the center of the monitoring area (azimuth angle).
 Check whether the Radar is installed with the elevation angle within a reasonable range.
 Check whether the trigger distance of the Radar is configured within a reasonable range.
 Check whether the azimuth angle of the Radar and lane parameters are configured correctly
(through the vehicle track on the software under debug mode).
The Radar measures speed when no vehicles pass.
 Check whether there is strong magnetic field or rotating objects around the Radar.
 Check whether there are objects with high reflection such as metal, advertising board and wall.
The vehicle tracks are abnormal under debug mode after commissioning the Radar.
 Read the installation and lane parameters and synchronize them to the Radar.
 Check whether the Radar is tightly installed.