User's Manual

User’s Manual
26
Testing Radar Configuration 7.5
After all configurations on the camera web client, you can check the effect on the camera Live view.
Preparations
 Make sure that the Radar is online.
 When only selecting Video Analyse from Trigger Source for ANPR event, make sure that the
capture triggering line of the camera and the report triggering line of the Radar are as close as
possible.
 For capture triggered by the Radar, make sure that you have set Trigger Source to Radar when
configuring capture rule.
 For speed measurement by the Radar, make sure that you have set Trigger Source to Video
Analyse, and Radar Calc Speed is selected in Other Settings.
Procedures
Log in to the camera web interface. Step 1
Click Live, and then check whether the capture and the speed measurement data are Step 2
correct.