User's Manual

ManualsBrandsZhejiang Dahua Vision Technology ManualsElectronicsMulti Target Bayonet Radar

Table Of Contents

User’s Manual

24

Configuring Speed Measurement by the Radar 7.3

The Radar can be configured to measure vehicle speed and overlay the speed information onto the

snapshots captured by the camera.

Log in to the camera web client. Step 1

Select Setting > Event > ANPR Snap > Illegal Capture > Rule Config. Step 2

Rule configuration Figure 7-5

Select ANPR from Event Type, and set other parameters as needed. Step 3

Click , and then configure the corresponding advanced parameters of ANPR. Step 4

Select Video Analyse from Trigger Source and then click Confirm. Step 5

Advanced parameters of ANPR event Figure 7-6

Select Setting > Event > ANPR Snap > Illegal Capture > Other Settings. Step 6